Series 4155 USB OEM spectra sensor
Windows device driver and application software included.
Scientific Term: Reflective Spectrometer
|Operating temp:||- 20 ...+ 60 degree C|
|- 04 ...+ 140 degree F|
|Weight:||6 oz (0.17 kg)|
|Protection:||IP 54, NEMA 3|
|USB powered, 6ft cable|
|Humidity:||Up to 98% permissible|
|Software :||Device driver for Windows|
|Analyzed surface area:||10 mm2|
|Capture time:||1.3 sec|
|Data capture:||128 x 10 bit|
|Output module with 6ft cable is included|
|The Spectra Sensor measures
the spectral reflection coefficient of surfaces. It has a built-in light
source with continuous spectrum. Device compares the spectra of the light
source shining on the surface under analysis and the spectra of light
reflected by the surface. The resulting data from the comparison is the
spectral reflection coefficient of surface. Each unit is separately
calibrated. The spectral reflection of a colored surface is shown as a
graph or in numerical format. Measurement results can be saved as text or
The Spectra Sensor's PDA has 128 pixels. The PDA detector has a spectral range sensitivity of 400 through 800 nanometers. Spectral resolution is 10 nanometers. Signal from each cell of the PDA is processed by a 10-bit analog-to-digital converter. 2 high-low opto-coupled outputs can be activated
nominal charge of $100.00, Hohner Corp. will test and evaluate your
samples to ensure this product meets your specific requirements and
standards. Should modifications be required, Hohner Corp. will
advise in writing of any additional charges.
Cleaning of Device: Should be done regularly with a clean, dry, lint free cotton cloth.
The Life expectance of this device is 50,000 hours
Two 1/4" holes 2-3/4" apart are for precision mounting with dowel pins.
|1 800 295 5693||
UK + 44 01978 363 888
BR 55 01938 775214