Series 2634 OEM roughness detector with 4 ... 20 mA Analog Ouptut

2 6 3 4                          
 

 

  
Surface area is 10 mm2 
Distance to target is 1/8"
 
 
 
   
3D AutoCAD drawing of sensor (zipped)   -   DWG = [R13] [R14] [R2000]       DXF = [R13] [R14] [R2000]
Technical Data Description
Operating temp: - 20 ...+   60 degree C The roughness sensor has a built in infrared light source.  Scattered light reflected from a rough surface is analyzed and the roughness factor is calculated in the following way:

 

- 04 ...+ 140 degree F
Weight:    6 oz (0.17 kg)
Protection: IP 54, NEMA 3
Housing: Aluminum
Humidity: Up to 98% permissible Output
Roughness range:  0.05 to 20 micron A Sample output is shown below
Illumination:  890 nm
Connections
5 pole mini
1 + 5 to 24 Volts
2 GND
3 Output
4 NC
5 NC
 
Dimensions
For a nominal charge of $100.00, Hohner Corp. will test and evaluate your samples to ensure this product meets your specific requirements and standards.  Should modifications be required, Hohner Corp. will advise in writing of any additional charges.

Cleaning of Device: Should be done regularly with a clean, dry, lint free cotton cloth.

The Life expectance of this device is 50,000 hours

 
1 800 295 5693 

UK   + 44 01978 363 888

BR   55 01938 775214