Series 6R22 OEM refractive index sensor with Analog output 10...20 mA

6 R 2 2 X                  
 

 

 Options
    1 = Diesel / Water Detector
    2 = Diesel Quality Sensor
     
     
 
 
 
   
3D AutoCAD drawing of sensor (zipped)   -   DWG = [R13] [R14] [R2000]       DXF = [R13] [R14] [R2000]
Technical Data Description
Operating temp: - 20 ...+   60 degree C The refractive index sensor has a built in LED source.  Light refracted in a liquid is analyzed and the refractive index is calculated as a difference. For instance, the sensor lights up an LED which is externally visible when X% of water is in the diesel.  Some applications may need calibration.  Due to the sensitivity and high sample rates it is advised that the sensor be mounted firmly avoiding any environmental light.  
- 04 ...+ 140 degree F
Weight:    7 oz (.2 kg)
Protection: IP 54, NEMA 3
Housing: Plastic
Humidity: Up to 98% permissible
Indicator: LED Comparative measurement mode
Connections To hold a specific surface finish, the sensor output can be compared with a previously obtained one. This will provide monitoring of the refractive index during a technological process. The previously obtained sensor output is taken on    a “template” liquid that meets quality requirements.
6 ft cable
Color Function
Black Load to GND
Red +11 ... 24 Volts
Aside is a sample graph showing the sensor output versus the refractive index.  Note that the output shown across is not typical and varies for different materials and machining processes.
Ways to Hook up Device
1. It can be mounted directly onto vehicles by connecting the power to the 12 Volt battery and ground to the chassis.
2. Hazardous areas stationary 24 Volt powered with barriers
3. Stationary 24 Volt powered
4. External LED (for external warning)
Certifications
- Certified to IS classification for:    

            I M1 EEx ia I    and / or  II 1G EEx ia IIC T4  
- Ta = -20 degrees C to +60 degrees C
- SIRA certificate No 00ATEX2126X
- Tested to carry CE mark
- UL listed file number E216028
- For use in class 1 group A, B, C, & D hazardous locations
- Channel 1 : Ui = 28V   li = 47mA  Pi = 0.33W Ci = 0 Li = 0
- Channel 2 : Ui = 28V   li = 47mA  Pi = 0.33W Ci = 0 Li = 0
Dimensions
For a nominal charge of $100.00, Hohner Corp. will test and evaluate your samples to ensure this product meets your specific requirements and standards.  Should modifications be required, Hohner Corp. will advise in writing of any additional charges.

Cleaning of Device: Should be done regularly with a clean, dry, lint free cotton cloth.

The Life expectance of this device is 50,000 hours
1 800 295 5693 

UK   + 44 01978 363 888

BR   55 01938 775214