Series 7455 USB colour meter 

                                                   

7 4 5 5                  
 

Windows device driver and application software included.
 
 
 
   
3D AutoCAD drawing of sensor (zipped)   -   DWG = [R13] [R14] [R2000]       DXF = [R13] [R14] [R2000]
Technical Data
Operating temp: - 20 ...+   60 degree C
- 04 ...+ 140 degree F
Weight:    1 kg
Protection: IP 66, NEMA 4X
USB powered, 6ft cable
Housing: Stainless Steel
Humidity: Up to 98% permissible
Capture time:  10 m sec
Data capture:  3 x 10 bit
Output module with 6ft cable is included
Intended for EEx d II C 
    
Description

The Colour Meter measures incoming light in terms of additive colours, Red-Green-Blue. The application provides immediate conversion into the Cyan-Magenta-Yellow system.  Input aperture is a diffuser with 5mm in diameter.  Spectral sensitivities are as following: 
Spectral range 420 .. 700 nm
Spectral response
Red - 420..530 nm
Green - 490-600 nm
Blue - 590-700 nm
Number of elements in the detector: 3
Signal from each channel is processed by a 10-bit analog-to-digital converter.  2 high-low opto-coupled outputs can be activated

 

Dimensions
For a nominal charge of $100.00, Hohner Corp. will test and evaluate your samples to ensure this product meets your specific requirements and standards.  Should modifications be required, Hohner Corp. will advise in writing of any additional charges.  
1 800 295 5693 

UK   + 44 01978 363 888

BR   55 01938 775214