Series 5434 Analog 4 ... 20 mA Output Colour meter 

5 4 3 4 X                              
    1 = Sensitive to Visible Light (fig. 1)
    3 = Sensitive to Red Light (fig. 2)
  4 = Sensitive to Green Light (fig. 3)
    5 = Sensitive to Blue Light (fig. 4)
     
     

 

  
     
3D AutoCAD drawing of sensor (zipped)   -   DWG = [R13] [R14] [R2000]       DXF = [R13] [R14] [R2000]
Technical Data Description
Operating temp: - 20 ...+   60 degree C The light meter measures intensity of light in a certain spectral range (see above).  A Silicon Photodiode is used as a detector that provised 5% linearity.  The output produced is a 4 ... 20 mA current loop.  The unit does not come calibrated, although it may be calibrated upon request.  The sensor is mounted using the cylindrical part of the surface.  

 
- 04 ...+ 140 degree F
Weight:    6 oz (0.17 kg)
Protection: IP 54, NEMA 3
Housing: Zinc
Humidity: Up to 98% permissible
Linearity: 5%
Cone Angle:  30 degrees Typical Output is shown on the graph.
Connections (Cable 6 ft)
GND:  Black
+ 24V: Red
Output:  White
Power Consumption: 60mA
Light Sensitivity Diagrams
Figure 1 (Visible)
Figure 2 (Red)
Figure 3 (Green)
Figure 4 (Blue)
Dimensions
For a nominal charge of $100.00, Hohner Corp. will test and evaluate your samples to ensure this product meets your specific requirements and standards.  Should modifications be required, Hohner Corp. will advise in writing of any additional charges.

Cleaning of Device: Should be done regularly with a clean, dry, lint free cotton cloth.

The Life expectance of this device is 50,000 hours

Two 1/4" holes 2-3/4" apart are for precision mounting with dowel pins.
1 800 295 5693 

UK   + 44 01978 363 888

BR   55 01938 775214