Series 2462 OEM color detector with fiber optic input

2 4 6 2                  
3D AutoCAD drawing of sensor (zipped)   -   DWG = [R13] [R14] [R2000]       DXF = [R13] [R14] [R2000]

Technical Data Connections
Operating temp: - 20 ...+   60 degree C 5 pole mini
- 04 ...+ 140 degree F 1 GND
Weight:    6 oz (0.17 kg) 2 12 to 24 V
Protection: IP 54, NEMA 3 3 Blue
Housing: Aluminum 4 Green
Humidity: Up to 98% permissible 5 Red
The fiber optic input is 1/4" diameter
The length of the fiber optic is 36"
The Colour Sensor measures colour reflection coefficients of surfaces.  It has a built in halogen light source.    Spectral sensitivities are as follows:
Spectral range 420 .. 700 nm
Spectral response
Red - 420..530 nm
Green - 490-600 nm
Blue - 590-700 nm
Number of elements in the detector: 3
Signal from each channel is processed by a 10-bit analog-to-digital converter.  2 high-low opto-coupled outputs can be activated
The detector senses the color of a master sample and the information is stored inside.  This measurement is then compared with the actual data retrieved from production samples.  If the color being measured has the same color then a 1 is the output and otherwise its a 0.  The detector is adjusted according to customer needs.
For a nominal charge of $100.00, Hohner Corp. will test and evaluate your samples to ensure this product meets your specific requirements and standards.  Should modifications be required, Hohner Corp. will advise in writing of any additional charges.

Cleaning of Device: Should be done regularly with a clean, dry, lint free cotton cloth.

The Life expectance of this device is 100,000 hours

1 800 295 5693 

UK   + 44 01978 363 888

BR   55 01938 775214